Air Knives / Air Knife

Standard Air Blade^TM (Air Knives, Air Knife)

Air Consumption approx. 3.4 SCFM (82 SLPM) per inch (25.4 mm) at 80 psig (5.5 bar) with force and noise levels comparable to standard air knives of all types (approx. 2.7 oz (77 grams) and 83 dBA at 80 psig or 5.5. bar and 6" (152 mm) from the target.

Click Here

X-STREAM^TM Air Blade^TM (Air Knives, Air Knife)

Air Consumption approx. 2.9 SCFM per inch at 80 psig with force and noise levels comparable to standard air knives of all types (approx. 2.7 oz (77 grams) and 83 dBA at 80 psig or 5.5. bar and 6" (152 mm) from the target.

The X-STREAM^TM Air Blade^TM air knife is normally the best choice due to very low noise levels and it uses less air than a standard air blade air knife at the same pressure. However the standard unit is lower in cost and has a slightly higher force at the same pressure. Either version may be mounted end to end for longer lengths of continuous flow.

Click Here

Curved Air Blade^TM (Air Knives, Air Knife)

The new X-stream^TM Curved Air Blade^TM air knife is easy to mount and maintain and reduces both compressed air consumption and noise levels. It's curved design produces an expanding, powerful blast of air in a fan shape to blow off wide areas and can minimize air use using longer air knives. Developed to address areas with limited space to flow off a large area.

As with regular X-stream^TM Air Blade^TM air knives, the X-stream^TM curved Air Blade^TM produces a "laminar" flow of air along its curved face using the "Coanda" effect which entrains a large volume of air from the surrounding area along with a small amount of compressed air to produce an output flow up to 40 times.

Click Here

Industrial Vibrators

Pneumatic Air Vibrators

Air Vibrators by NAVCO® Products effectively promote material flow by eliminating the formation of bridges and rat holes in storage containers. Also called pneumatic piston vibrators, there are models and options to fit containers of all shapes and sizes including: Bins, hoppers, and silos and also pipes. Ideal for both flat walled hoppers and conical hopper, the NAVCO® Products BH Air vibrators supplied by KJN is low maintenance and economical to operate compared to other types of shaker devices.

> Industrial Air Vibrators Details > Literature About Air Vibrators

Bin Mapping

The exclusive NAVCO® Products Bin Mapping methodology involves a detailed evaluation of your storage vessel and its intended bulk material by NAVCO® Products Bulk Flow Engineers. Recommendations are made based on a variety of factors including bulk density, particle size, moisture content, temperature, vessel size and shape as well as material of construction. This unique scientific approach, called the Bin Map Solution, is not available any where else. It was developed by NAVCO® Products and provides a reliable solution that virtually guarantees positive material flow.

> Bin Map Details > Literature About Bin Maps

Wagon & Hopper Car Vibrators

Portable HCP - NAVCO® Products Air Piston Vibrators for rail car wagons are designed with a unique mounting head to fit into the special NAVCO® Products dovetail bracket that can be installed on the hopper car vibrators of wagons to improve unloading and discharge. Overhead and Stationary Wagon & Hopper Car Vibrators Shakers. Available soon for heavy duty wagon unloading.

> Wagon Vibrators Details > Literature About Wagon Vibrators

Hopper Car Vibrators

NAVCO® Products manufactures a complete line of portable pneumatic hopper car vibrators for rail car and other portable industrial applications. The Navco Products HCP model hopper car vibrators is designed to provide reliable and effective performance in difficult applications and severe environments. The HCP's special features make it ideal for solving Heavy-Duty railcar unloading problems.:
Features Of Hopper Car Vibrators:
All internal surfaces of the Hopper Car Portable Vibrators are coated with Teflon for durability and long lifeUniversal mounting head on the railcar hopper car vibrators- fits ALL dovetail brackets found on hopper car vibrators. Our "Free-Ride"design is THE most efficient means to transmit vibration energy into the railcar. Also prevents the HCP from becoming stuck in the bracket of the hopper car vibrators.

Truck Vibrators

NAVCO® Products Air vibrators for truck lift stations, dump truck vibrators beds and hopper trailers are available from KJN for assisting with discharge of truck vibrators beds.

> Truck Vibrators Details > Literature About Truck Vibrators

Electromechanical Vibrators

Electromechanical Unbalance Vibrators supplied by KJN are used as drives on linear motion vibratory feeders and screens. They can also be used to facilitate material flow in storage containers such as bins and hoppers when certain conditions exist or when Air Vibrators are not possible.

> Electromechanical Vibrator Details > Literature about Electric Vibrators

Portable Vibrators

The NAVCO® Magnetic mount and clamp on vibrators distributed by KJN are ideal for use where light duty vibration is needed in multiple locations. The MV vibrator has a magnetic mounting head as well as a ferrous mounting sticker pad so it can even mount on non-ferrous hoppers . The FV vibrator has a screw-clamping mount. The ST is a stud mount and the MP is a pin mount. Each model has several sizes available except the Magnevibe (one size only).

> Portable Vibrator Details > Literature about Portable Vibrators

Foundry Vibrators

KJN offers a complete line of pneumatic vibrating equipment for a more efficient foundry. Special ductile iron castings enable these NAVCO® foundry vibrators to be machined specifically to withstand high temperatures and prolonged usage.

> Foundry Vibrators Details > Literature about Foundry Vibrators

Ball Vibrators

Pneumatic Ball vibrators supplied by KJN can be used to facilitate material flow in many types of storage containers. They are small, light weight and low maintenance.

> Rotary Ball Vibrators Details > Literature about Ball Vibrators

Pneumatic Cylinders

Standard Pneumatic Cylinders

Our standard range of pneumatic cylinders is vailable in ore sizes ranging from 6mm diameterto 350mm diameter with strokes starting from 15mm to 1000mm long.



ISO Pneumatic Cylinders

These cylinders are made as per ISO 6431 standards for pneumatic cylinders. ISO Pneumatic Cylinders are available in Bore size starting from 32mm and with all types of Pneumatic ISO Cylinders mountings.


Special Construction Pneumatic Cylinders

These pneumatic cylinders, like our SPMs, are made as per client's requirement. Some examples of these pneumatic cylinders are: Magnetic Reed Switch-Type Position Sensing Pneumatic Cylinders, Hollow Shaft Cylinders, Stroke Adjustment Cylinders, Tandem Cylinders, Impact Cylinders, Continuously reciprocating Pneumatic Cylinders, Pneumatic Cylinders Special Construction Cylinders etc.